Custom frame

Measure the width and height of the artwork you'd like to frame, rounding up to the nearest 1/8", and provide both dimensions below.

X
Frame It

Please provide the full dimensions of the paper on which your artwork is printed. To measure, flatten out your print as much as possible and measure the width and height from edge to edge. Round up to the higher 1/8” if you are in between.

Note that your final frame, or the mat if one has been selected, will overlap your artwork by approximately 1/4” on each side so as to secure it inside the frame.

If you would like the mat to overlap your print by more than the standard 1/4”, please contact us via chat or by emailing support@levelframes.com.

Let's Get Started

Use the arrows to adjust the fraction
Use the arrows to adjust the fraction